China CNC Lathe Processing Parts Machining difficulty of long axis 聽 Long-axis workpieces are common lathe turning workpieces. Due to the poor rigidity of long-axis workpieces, the stress and thermal deformation generated during turning processing, it is difficult to ensure the processing quality of long-axis workpieces. The processing quality standard of the long axis can be ensured by using a suitable clamping method, selecting a reasonable lathe tool angle and cutting speed, etc. Due to the influence of various factors, long-axis workpieces are prone to defects such as curved waist drum shape, polygonal shape, bamboo knot shape, etc., especially the rough surface is poor. The workpiece generally requires heat treatment such as quenching and tempering during processing. The cutting heat during turning is more likely to cause deformation of the workpiece. 聽 Machining technology of long axis 聽 Insert the long-axis workpiece into the three-jaw chuck and tighten the jaws until the chuck begins to grip the long-axis workpiece. Rotate the workpiece to ensure it is sitting evenly, and remove any chips or grit on the surface that might keep it from sitting evenly. The long-axis workpiece should be processed as parallel as possible to the center line of the lathe. Use each of the three chuck keys to tighten the chuck to ensure a tight and even grip. Choose a tip with a slightly rounded tip, this type of tool should produce a nice smooth finish. For more aggressive cuts, a sharper cutter is recommended if long-axis workpieces require significant metal removal. Make sure the tool is clamped tightly to the tool holder. Adjust the cutter head and cutting speed, while setting the lathe processing speed and feed to start machining the long axis. The purpose of using the lathe is to offset the influence of the radial cutting force on the workpiece during the machining process, reduce cutting vibration and deformation of the workpiece due to insufficient rigidity. When using a follow-up lathe, it is necessary to ensure that the center of the numbering bed is consistent with the center of the turret, because the characteristics of the turret are not suitable for workpieces that require Swiss turning twice, and can only be turned once in situ. 聽 Overview 聽 CNC lathe processing10 CNC lathes processing typeHigh precision, complex process, large size processing materialAluminum, metal, stainless steel, steel alloy, aluminum alloy, etc. CNC lathe maximum processing sizeDiameter 800mm, length 1500mm 聽 Processing 聽聽 Our Inspection Equipment 聽 Audit Production and processing Product inspection (first inspection - process inspection - finished product inspection) FAQ 聽 1. What is the largest size range of CNC lathe? Diameter 800mm, length 1500mm 2. When can I get the quotation? We usually quote within 24 hours after we get your inquiry, welcome your inquiry. 3. What machines are in your factory? CNC machining centers, CNC lathes, large surface water mills, internal and external circular grinders, and gantry milling machines.China CNC Lathe Processing Parts website:http://www.ysd-cncparts.com/cnc-lathe-processing-parts/