Milling Parts manufacturers Milling object Precision CNC milling metal parts are also divided into many types, generally planar parts and curved surface parts. (1) Flat parts The characteristics of planar parts are that the processing surface can be parallel to the horizontal plane, perpendicular to the horizontal plane, or form a fixed angle with the horizontal plane; most of the parts processed on the CNC milling machine are planar parts, and planar parts are The simplest type of parts in CNC milling processing generally only needs to be processed by two-axis linkage or three-axis linkage of a three-coordinate CNC milling machine. During the machining process, the machined surface is in surface contact with the tool, and end mills or bull nose cutters can be used for both rough and finish machining. (2) Surface parts The characteristic of curved surface parts is that the processing surface is a spatial curved surface. During the processing, the processing surface and the milling cutter are always in point contact. Surface finishing is mostly carried out with ball end milling cutters. 聽 Milling machine operating procedures 1. When milling irregular workpieces and using vises, dividing heads and special fixtures to hold workpieces, the center of gravity of irregular workpieces, vises, dividing heads and special fixtures should be placed in the middle of the workbench as much as possible to avoid The workbench is unevenly stressed and deformed. 2. During fast or automatic feed milling, it is not allowed to move the worktable to the two extremes, so as not to squeeze the screw rod. 3. Motorized tool setting is not allowed, and tool setting should be done manually. 4. When reversing the direction of the workbench, the reversing handle must be stopped at the middle position first, and then reversing. Direct reversing is not allowed. 5. When milling keyway shafts or cutting thin workpieces, be careful not to damage the dividing head or work table. 6. When milling a plane, it is necessary to use a cutterhead with more than four cutter heads, and select an appropriate cutting amount to prevent the machine tool from vibrating during milling. 聽 Features of milling 聽聽 Team 聽 Audit Production and processing Product inspection (first inspection - process inspection - finished product inspection) 聽 FAQ 聽 1. Are you a manufacturer? Answer: Yes, we are a professional manufacturer specializing in precision industrial equipment parts processing products. 2. When can I get the quotation? We usually quote within 24 hours after we get your inquiry, welcome your inquiry. 3. Where can we get product information? You can use our website link as follows: www.yirabbit.com (not yet) You can also contact our international marketing team. Milling Parts manufacturers website:http://www.ysd-cncparts.com/milling-parts/