When you've got an area of leach that's elevated you're using an effluent pump. The effluent pumps differ from sewer pumps that release solids and water from plumbing fixtures in basements. They are connected to the plumbing system inside the houseand have to be maintained and repaired by an authorized plumber. The effluent pump, also known as a «lift pump», sits within a chamber in the septic tank. It pumps the graywater to the dispersal area of the effluent or leach field.
They are extremely robust. If maintained properly, they can last for an extended time. If they are not, you could require our repair of your septic pump!
A malfunctioning effluent pump can be an emergency situation with your septic. Your leach field elevated higher than the pipe that connects to the tank for septic. The sewage can then flow back to your basement. Even though there is a safety valve on the back of the pump that will prevent this from happening, the tank will eventually overflow and then backup. Fortunately, pumps for effluents come with an alarm that alerts your that pump isn't working. If you are able to hear the alarm, you should call Maznek Septic Service immediately!
Also Read: Septic Mound Inspection Pipes
Do you need to replace or fix it? Typically, effluent pumps last about 10 to 15 years, based on the amount of effort required by the pump to work to bring graywater to the leach field, as well as the frequency at which it fills. It's best to replace an any pump that is nearing to the close of service instead of repairing it.
Alarms and floats. The issue with your effluent pump might not be related to the pump itself at all. There are high-water and low-water sensors inside the pump's chamber that turn the pump's on and off. The first step is to test. It's much simpler and cheaper to replace a floating float than to replace the pump!
The leach fields in the higher elevations require special maintenance to keep them in good shape. Our maintenance programs for septic tanks are unbeatable and are designed to help you reap the most benefit the septic tank in your house.
Effluent pumps are essential for an elevated-leach system, that we incorporate the inspection of pump operation as well as chamber cleaning out as part of our regular pumping services. To make the most from your system contact Maznek Septic Service today!
Also Read: How Many Yards in a Pallet of Concrete
Electrical issues
If the pump doesn't seem to be functioning or at all, fails to respond to any tests, and isn't pumping effluent it could be due to an issue with the wiring. Check the circuit breaker and follow up with an instrument like a multimeter to inspect the wiring in the septic system for damage and determine what should be replaced.
A fuse has blown, or circuit breakers are activated. Examine fuses and circuit breakers. Replace the fuse as necessary. Make note of the size suggested by the manufacturer of the pump and the nameplate of the pump. Contact an electrician to fix the circuit, if necessary.
The power cord for the pump is not wired properly and is not making good contact. If the system is using an auxiliary plug-in, examine the prongs on the cap of the pump for the tightness and corrosion. Install the new plug and wash the prongs of the plug using abrasive paper or replace the electrical receptacle.
The branch circuit's wiring is too small to support an adequate load for the pump. Make sure the line voltage is checked and compare it to specifications of the manufacturer. The pump should be connected to its circuit breaker (or fuse). When the circuit breaker supplies electricity to other appliances or outlets it is recommended to install an outlet to allow the pump to have its own circuit breaker. Get an electrician in to repair the circuit.
The motor overload of the pump tripped. Let the pump cool for 5 to 10 minutes, then reconnect it. If the overload continues to trip you must take corrective actions. Check the voltage of the line and compare it with specifications of the manufacturer. An electrician or power company inspect the voltage of the branch circuit. Connect the pump to an independent branch circuit.
The voltage supplied is too low. The voltage must be + or minus 10% of the motor's ratings. Make sure that power is being delivered to the system by measuring how much voltage is present at the pressure switch, the control box as well as any other component which power is flowing through. If you notice that the voltage is too high or too low at the panel for power, you might have to call your power provider. The pump's voltage is low and could also result in thermal overload and shut down. Repair the electrical circuit and, if necessary, call the energy provider.
Connections to the control panel as well as watertightness. Conduct an examination visually for obvious wear and tear. Check for loose connections as well as melting or burned components. Checking the voltage on the control panel could have led to think that this might be the cause of your issue.
Connections that are not working or a damaged conduit. Examine all electrical splice connections for signs of corrosion, and any other indicators that power isn't reaching the pump. Verify that the conduit isn't damaged and that the wiring as well (i.e. in the event that it was struck by the lawn mower).
Also Read: Does Liquid Nails Work on Metal
Arabic
French
Spanish
Portuguese
Deutsch
Turkish
Dutch
Italiano
Russian
Romaian
Portuguese (Brazil)
Greek