Dehumidifying And Drying in stock Mold Dehumidifier 1. The working principle of this machine is that after the air has been dehumidified by the runner, it is blown into the mold through the pipeline to remove the water droplets on the mold, so as to ensure the cleanliness of the mold. 2. The mold dehumidifier produced by our company adopts imported rotating honeycomb, which can provide about 10 degrees dew point, and the dew point is stable.Dehumidifying And Drying in stock website:http://www.cr-isbm.com/accessory/dehumidifying-and-drying/