If the cat m1 gps tracker is not able to locate, then we have no way to know the latest location of the vehicle and the trajectory of the vehicle.

So what if the cat m1 gps tracker shows no location?

First, the two reasons for not positioning

The cat m1 gps tracker may not locate in the following two cases: First, the device cannot be located during the first installation; Second, the equipment can be used normally before, but suddenly it can not be located.

Second, the first installation can not locate the solution

If this is the first case, then you need to observe whether the GPS status indicator of the device is normal. Here we take Sward S100 as an example, when the blue GPS status light of the device is steady on, it is normal, and if the blue light blinks slowly, the satellite can be searched but cannot be located; Blue flash means the GPS module is working but there's no signal.

If the blue light keeps flashing, the owner can move the device to the open air for testing. If yes, change the installation position. If the equipment faces up in the open air, the blue light flashes quickly, it needs to be returned to the factory for testing.

Third, the device suddenly can not locate the solution

If it is the second case, the owner can first check whether there are tall buildings around the vehicle or high voltage lines near the head, because tall buildings or high voltage wires will have a certain shielding effect on the GPS signal.

You can drive the car to an open area, and then send a status command to the device to check the status of the device to see if it has improved. If it is still not positioned, you can check the installation position to see if the device is still in the previous installation position, because in the process of use, the device may be offset by vibration or other reasons, resulting in the normal positioning of the device.

If the device is still in the original position, but the device still cannot be located, remove the device, put it in the open air face up, if the GPS signal light is abnormally blinking, the device needs to be returned to the factory for testing.

cat m1 gps tracker https://www.eelinktracker.com/news/lte-cat-m1.html